Mazagon Dock Shipbuilders Limited
No. of Vacancies: 985
Job Location: Mumbai, Maharashtra
Following Posts
1. A/C Refrigeration Mechanic - 01
2. Brass Finisher - 11
3. Carpenter - 11
4. Composite Welder - 240
5. Draughtsman (M) - 15
6. Driver - 04
7. Electric Crane Operator - 06
8. Electricians - 38
9. Electronics Mechanic - 15
10. Fitter - 31
11. Machinist - 03
12. Millwright Mechanic - 17
13. Painter - 27
14. Pipe Fitter - 58
15. Planner Estimator (M) - 08
16. Planner Estimator (E) - 02
17. Quality Control Inspector (M) - 10
18. Quality Control Inspector (E) - 01
19. Rigger - 50
20. Stores Staff - 01
21. Structural Fabricator - 291
22. NDT Inspector - 04
23. Engine Driver/2nd Class Engine Driver - 01 Semi Skilled (IV A)
24. Launch Deck Crew (Laskar) - 08
25. Security Sepoy - 06
26. Chipper Grinder - 65
27. Fire fighter - 13
28. Utility Hand (Semi Skilled) - 42
29. Sail Maker (Tailor) - 06
Educational Qualification:
1. A/C Refrigeration Mechanic - Passed SSC or equivalent examination conducted by a Board recognized by the Government and National Apprenticeship Certificate Examination passed in the trade of “Refrigeration and Air Conditioning.
2. Brass Finisher - Brass Finisher is not a designated trade under the Apprenticeship Act .The candidate who have worked in MDL/Shipbuilding industry as a Brass Finisher but have undergone apprenticeship training in any trade can apply for the post of Brass Finisher directly. However, the experience certificate should be certified by their Personnel Dept. Candidate who have passed ‘NAC’ in the trade of “Machinist” without Shipbuilding experience can apply for the post of “Trainee Brass Finisher”.
3. Carpenter - Passed VIII std and the National Apprenticeship Certificate Examination passed in the trade of “Carpenter”.
4. Composite Welder - Passed VIII std and the National Apprenticeship Certificate examination passed in the trade of “Welder / Welder (G&E)”.
5. Draughtsman (M) - Must have passed SSC or equivalent examination conducted by a Board recognized by the Govt. and must have passed the “National Apprenticeship Certificate Examination in the Trade of ‘Draughtsman’ in Mechanical Stream conducted by NCVT of the Directorate General of Employment & Training, Ministry of Labour, Govt. of India.
6. Driver - SSC or equivalent examination conducted by a Board recognized by Govt. or passed Indian Army class-I examination in the Navy or Air Force. Should have valid Driving License issued by RTO without break/adverse remarks. Heavy duty motor vehicle driving license preferable.
7. Electric Crane Operator - Passed SSC & the National Apprenticeship Certificate Examination passed in Electrician trade and having one year experience in MDL/ Ship-building industry as Electric Crane Operator may apply for the post of Electric Crane Operator directly. However, the experience certificate should be certified by their Personnel Dept. In case of non-availability of candidates with above required qualifications, candidates who have passed NAC in Electrician trade may be considered as “Trainee Electric Crane Operator” subject to suitability.
8. Electricians - Passed SSC or equivalent examination conducted by a Board recognized by the Government and the National Apprenticeship Certificate Examination passed in the trade of “Electrician”.
9. Electronics Mechanic - Passed SSC or equivalent examination conducted by a Board recognized by the Government and National Apprenticeship Certificate Examination passed in the trade of “Electronic Mechanic”.
10. Fitter - Passed SSC or equivalent examination conducted by a Board recognised by the Government and must have passed the “National Apprenticeship Certificate Examination” in the trade of “Fitter”. The candidate who have worked in MDL/Shipbuilding industry as a Fitter for minimum one year but undergone Apprentice Training in any other trade can apply for the post of Fitter directly.
11. Machinist - Passed SSC or equivalent examination conducted by a Board recognised by the Government and National Apprenticeship Certificate Examination passed in the trade of “Machinist”
12. Millwright Mechanic - SSC or equivalent with National Apprenticeship Certificate Examination passed in the trade of “Millwright Mechanic / Mechanic Machine Tool Maintenance”.
13. Painter - Passed VIII std and the National Apprenticeship Certificate Examination passed in the trade of “Painter”.
14. Pipe Fitter - Passed SSC or equivalent examination conducted by a Board recognised by the Government and the National Apprenticeship Certificate Examination passed in the trade of “Pipe Fitter” or Passed SSC or equivalent examination conducted by a Board recognised by the Government and National Apprenticeship Certificate Examination passed in the trade of “Plumber” and having one year experience in MDL/Ship-building industry as a Plumber may apply for the Post of Pipe fitter directly. However, the experience certificate should be certified by their Personnel Dept. Candidate who have passed SSC with ‘NAC’ in Plumber trade without Shipbuilding experience can apply for the post of “Trainee Pipe fitter”.
15. Planner Estimator (M) - Must have passed SSC / HSC with full time three years Diploma with aggregate 55% marks or full time Degree with pass class in Mechanical (Mechanical/Mechanical & Industrial Engg./Mechanical & Production Engg./Production Engg.) or Marine Engineering in Examination conducted by Govt. recognised Technical Board / University.
16. Planner Estimator (E) - Must have passed SSC / HSC with full time three years Diploma with aggregate 55% marks or full time Degree with pass class in Electrical ( Electrical / Power Engineering / Electrical & Electronics/Electrical & Instrumentation) / Electronics (Electronics / Electronics & Communication /Allied Electronics & Instrumentation /Electronics & Telecommunication) or Marine Engineering in Examination conducted by Govt. recognised Technical Board / University.
17. Quality Control Inspector (M) - Must have passed SSC with full time three years Diploma with aggregate 55% marks in Mechanical ( Mechanical/Mechanical & Industrial Engg./Mechanical & Production Engg./Production Engg) or Marine Engineering in Examination conducted by Govt.of India recognised Technical Board.
18. Quality Control Inspector (E) - Must have passed SSC with full time three years Diploma with aggregate 55% marks in Electrical ( Electrical / Power Engineering / Electrical & Electronics/Electrical & Instrumentation) / Electronics (Electronics / Electronics & Communication /Allied Electronics & Instrumentation /Electronics & Telecommunication) or Marine Engineering in Examination conducted by Govt.of India recognised Technical Board.
19. Rigger - Passed VIII std and the National Apprenticeship Certificate Examination passed in the trade of “Rigger”.
20. Stores Staff - Must have passed SSC / HSC with full time three years Engineering Diploma in Mechanical, Electrical, Electronics, Electronics & Telecommunication, Instrumentation, Computer engineering .Additional qualification in Material Management & Knowledge of Computer will be Preferred.
21. Structural Fabricator - Passed SSC or equivalent examination conducted by a Board recognised by the Government and National Apprenticeship Certificate Examination passed in the trade of “Structural Fitter / Fabricator” or Passed SSC or equivalent examination conducted by a Board recognised by the Government and National Apprenticeship Certificate Examination passed in any other trade and having one year experience in MDL/Ship-building industry as a Structural Fitter may apply for the Post of Structural Fitter directly. However, the experience certificate should be certified by their Personnel Dept.. The candidate having National Apprenticeship Certificate examination passed in “Sheet Metal Worker” trade will be considered for “Trainee Structural Fabricator”
22. NDT Inspector - Must have passed SSC with full time three years Diploma in Mechanical Engineering. In addition to this it is essential to have ISNT/ASNT Level II certification in Radiography interpretation, Ultrasonic Testing ,Magnetic particle testing and Dye penetrate testing.
23. Engine Driver/2nd Class Engine Driver - Certificate of competency (Engine Driver 2nd Class) issued by Maharashtra Maritime Board/Mercantile Marine Dept. as per Indian Vessel Act. Knowledge of Swimming is compulsory.
24. Launch Deck Crew (Laskar) - Passed SSC or equivalent examination conducted by a Board recognised by the Government. General Purpose(GP) rating course with one year experience as Crew on board Tug/Launch/Vessel of 226 BHP or above. GP rating certificate issued by DG shipping approved institutes will be considered. Knowledge of Swimming is Compulsory. OR Non GP rating with 3 year experience as Crew on board Tug/Launch/Vessel of 226 BHP or above. Knowledge of Swimming is Compulsory.
25. Security Sepoy - Must have passed SSC or equivalent examination conducted by a Board recognized by Govt. Or passed Indian Army class – I examination or equivalent examination in the Navy or Air Force and has put in at least 15 years of service in the Armed Forces of the Union and is otherwise considered fit to hold the post in view of his experience and other qualifications. Candidates conversant with Security Duties and holding valid commercial driving license will be preferred.
26. Chipper Grinder - Chipper Grinder trade is not a designated trade under Apprenticeship Act. Candidates who have passed SSC and NAC in any trade and have worked in Shipbuilding industry as Chipper Grinder for minimum period of one year may apply for the said post directly. However, the experience certificate should be certified by the Personnel Dept. In case of non-availability of candidates as Chipper Grinder, the candidates having passed SSC with NAC examination conducted by NCVT in the trade of Machinist / Machinist (Grinder) / Turner may apply for the post of “Trainee Chipper Grinder”.
27. Fire fighter - Candidates must have passed SSC or equivalent with Diploma / Certificate in Fire Fighting of minimum six months duration from a Govt. recognised institute. Candidates must posses a valid Heavy Duty Vehicle Licence.
28. Utility Hand (Semi Skilled) - Utility Hand is not a designated trade under the Apprenticeship Act. Candidates who have passed SSC with NAC in any trade and have worked in Shipbuilding industry as Utility Hand for minimum period of one year may apply for the said post. However, the experience certificate should be certified by their Personnel Dept.
29. Sail Maker (Tailor) - Candidates must have passed VIII std and the ITI in the trade of “Cutting & Tailoring/Cutting & Sewing”.
Age Limit:
Candidate’s Age Limit Should be between 18 to 33 Years. Go through official Notification 2017 for more reference
Pay Scale:
Skilled Gr-II (IDA-6 - Rs. 8000/-
Skilled Gr-I (IDA-5 - Rs. 7500/-
Semi Skilled Gr-III - Rs. 7250/-
Semi Skilled Gr-I(IDA-2 - Rs. 6000/-
Selection Procedure
Candidates will be selected based on Written Exam, Interview
Exam Fee / Application Fee Details for MDL Technical Staff and Operatives:
Application Fee:
For General/OBC Candidates Application Fee is - Rs.140/-
For All Other Candidates (ST/SC/Ex-s/PWD) Application Fee is - Nil
How to Apply:
1. Log on to MDL Careers Page at official website to www.mazdock.com
2. Eligible candidates are advised to open Notification
3. Read the Advertisement carefully to be sure about your eligibility
4. Click on the link New Registration
4. Fill your Academic Qualification & Other Related Information as per the instructions
5. Ensure the information provided is correct
6. Submit the application & Make Payments
7. Take a print out of MDL Recruitment 2017 online application form
Last date : 29.10.2017
Date of Examination: Nov/Dec 2017
Online Application MDL Official Notification & Application :
Official Notification PDF: Click Here to Download
MDL Online Application Form: Click Here to Apply
No comments:
Post a Comment